GPPS
PS
Styrolution® PS general purpose polystyrene resins are transparent polymers suitable for injection molding or extrusion applications. Uses for these products vary from food service and food packaging to refrigerator components, healthcare and diagnostic labware as well as XPS insulation.
Key Applications
- Food packaging in blends with HIPS
- Food packaging in blend with SBC
- XPS insulation boards
- Refrigerator drawers
- Medical labware/ application
- XPS packaging
- Office articles
Key Properties
- Transparency
- Heat resistance
- Medical
Brochures
- Product selection guide 2019PDF | 605 KB | EN
Product Path Finder
Rigidity, clarity | Melt Flow Rate, 200 °C/5 kg [g/10 min] | Vicat Softening Temperature, B/1 ( 120 °C/h, 10N) [°F] | Tensile Modulus [psi x 10³] | Tensile Stress at Yield, 23 °C [psi] | Izod Notched Impact Strength, 23 °C (73 °F) [ft-lb/in] | Technical Data Sheet | Safety Data Sheet | ||
---|---|---|---|---|---|---|---|---|---|
High heat | High melt strength | Styrolution PS 1200/1201 | 1.6 | 228 | 460 | 7600 | 0.4 | ||
High melt strength | Styrolution PS 1200Z | 1.6 | 228 | 460 | 7600 | 0.4 | |||
High melt strength | Styrolution PS 1270 | 1.6 | 228 | 460 | 7600 | 0.4 | |||
Low residual styrene monomer content | Styrolution PS 1290/1291 | 1.6 | 228 | 460 | 7600 | 0.4 | |||
Good balance of flow & strength | Styrolution PS 1300/1301 | 3 | 223 | 460 | 7100 | 0.4 | |||
Good balance of flow, strength & set-up properties | Styrolution PS 1611 | 6 | 222 | 460 | 6800 | 0.4 | |||
Easy flow material with excellent moldability | Styrolution PS 1621 | 6 | 223 | 460 | 6800 | 0.4 | |||
High flow | Styrolution PS 1700 | 11 | 223 | 430 | 5700 | 0.3 | |||
General purpose | Low residual styrene monomer content | Styrolution PS 2600/2601 | 3.4 | 205 | 460 | 6400 | 0.4 | ||
Excellent toughness | Styrolution PS 2610 | 3.6 | 208 | 460 | 6000 | 0.4 | |||
Good balance of flow, strength & set-up properties | Styrolution PS 3100/3101 | 10 | 213 | 460 | 6500 | 0.4 | |||
Low residual styrene monomer content | Styrolution PS 3190/3191 | 10 | 213 | 460 | 6500 | 0.4 | |||
Good balance of flow, strength & set-up properties | Styrolution PS 3600/3601 | 14 | 209 | 460 | 6200 | 0.4 |